rivet stud

The installation method and steps of the rivet stud:

1. To install the rivet stud, you first need to prepare the nozzle. At the same time, to match the stud with the stud, you need to select the corresponding gun head and bolt according to the size of the stud, so as to ensure that each part is firmly connected.

2. Next, adjust the length according to the scale ring of the gun head, open the 2 handles to adjust the sleeve of the gun head, and then tighten the studs with the sound of the gun. Put the corresponding studs on the top of the dome light of the bolts and stick them firmly , and then push and tighten the bolts. Put the studs into the pre-embedded holes, and press the 2 handles firmly to make the studs exit from the screw door, thus completing the installation of the entire stud.

3. During the installation process, if the stud is loose, it should be tightened in time. After use, the bolt must be protected from damage.

4. Pneumatic riveting tools can also be used, which can be rotated forward or reversed, and can be switched at any time. Pull riveting studs of different specifications correspond to different tool heads.