Rivet guns are a very popular product among the 5 gold tools used in daily life. With the increase of people's needs, it becomes more and more important to understand the structure and precautions of rivet guns. Today we will talk about this topic.

The internal structure of the riveting gun is quite complicated. Generally, the commonly used riveting guns on the market are roughly composed of these parts: buffer pads, cylinders, elastic cylindrical pins, movable valves, gaskets, gas guide blocks, pistons, valve sleeves , oil nozzle, fan, air nozzle, air guide ring, lock gasket, air guide block cover, protection spring, oil plug, valve stem, lubricating oil cavity, punch, etc. First, before using it, we need to give the air intake Add some lubricating oil to the mouth and ensure that the air pressure meets the requirements, so that the riveting gun can work normally. Secondly, when riveting, the punch must first press the rivet, and then press the button. After pressing the button, the riveting gun works normally and passes The adjustment button can control the size of the compressed air. When pressing the button, the button should be pressed lightly first, and then the button should be pressed hard after the riveting rod is filled with the riveting hole, so as to ensure the rapid forming of the pier head, and then slowly release the button after the riveting is completed. 3. Different types of rivets should use corresponding rivet guns, and do not mix them at will to prevent damage to the machine. When the rivet gun is not in use, do not empty it at will. You should put it in a suitable place and pay more attention to it. maintainance.

For the maintenance of the rivet gun:

1. When using the riveting gun, the staff shall not disassemble and assemble the riveting gun at will;

2. Under normal use, the rivet gun should be inspected and maintained for 3 months or half a year;

3. When not in use for a long time, it should be sealed and stored in the warehouse according to the specified conditions; when the riveting gun fails and needs to be checked, repaired or cleaned, and lubricated, it is necessary to disassemble and assemble the riveting gun.

The above is some relevant knowledge about riveting guns introduced to you. Today's sharing is here, and we will see you in the next issue.