Ring groove rivets can be divided into flat head, countersunk head type, semi-round head type, etc. according to the shape. According to the model, they can be divided into large diameter ring groove rivets, small diameter ring groove rivets, continuous groove ring groove rivets, etc., so it can be said that There are multiple categories, and their functions and usage situations are very different.

Introduction to ring groove rivets:

Variety: flat head, countersunk head type, semi-round head type, flat head type with flange.

Categories: large diameter ring groove rivets, small diameter ring groove rivets, continuous groove ring groove rivets, bobtail rivets.

Ring groove rivets are used for:

Ring groove rivets are used to rivet two structural parts into one piece. They are composed of two parts: a rivet and a nail sleeve. The rivet is composed of a nail rod and a nail sleeve. When riveting, first insert the rivet into the nail hole of the connected piece. , then put the nail sleeve on the ring groove of the working section of the rivet from the other side of the connected piece, and then use a special tool - the muzzle of the pneumatic ring groove rivet gun to put it on the ring groove of the clamping section of the rivet, and hold the muzzle against it The end face of the nail sleeve, and then pull the trigger on the gun, the rivet gun will tighten the clamping section of the ring groove of the rivet until it breaks. At this time, the inner wall of the nail sleeve squeezes into the working section of the rivet, forming a new rivet head. , thereby riveting and tightening the connected parts. Its characteristics are: easy operation, high efficiency, low noise, and good earthquake resistance, so it is widely used in various vehicles, ships, aviation, mechanical equipment, building structures and other fields.