Compared with traditional processes (welding and gluing), brushed rivets have the following advantages:

1. Low energy consumption. Drawing rivets do not need to consume raw materials and auxiliary materials, and the cost of consumption is only about 50% of spot welding. The traditional process has high cost and many consumables.

2. Cheap and durable, simple structure, easy to maintain. The price of riveting machine is similar to that of traditional equipment. In addition, traditional equipment is easy to age and maintenance is inconvenient.

3. The joint has a beautiful appearance and does not require surface treatment. There are traces on the welding surface and surface treatment is required (grinding, polishing, etc.). The adhesive is a high-strength adhesive, which is seriously corrosive to the workpiece.

4. The wire drawing rivets have high strength, which can non-destructively check the quality of the connection points.

5. Riveting equipment is used for a long time, with an average of 100,000 to 300,000 times.

6. The process is simple and does not require other pre- or post-processing (such as punching and surface treatment).

7. Solve the problem that the traditional technology cannot connect aluminum, magnesium, titanium and other metal materials.

8. The surface of the workpiece with the coating or paint layer will not be damaged, and the multi-layer or interlayer materials can be connected. The traditional process will destroy the surface coating.

9. High working efficiency, no noise, no dust pollution, environmental protection. The welding process is very noisy, with smoke, sparks and dust emissions. The process has low cost, simple operation and good joint quality, and is very popular in the market. China has Widely used in home appliance industry and automobile industry.

10. The cost of single installation is higher than that of threaded connection, but the cost of mass installation is much lower than that of threaded connection.

11. Production requires special tools such as punching riveting machines or rotary riveting machines, and the equipment is expensive.

12. After the connection, the self-pulling rivet cannot be disassembled, which not only damages the rivet, but also damages the surface of the stainless steel workpiece.

13. Although the riveted connection is beautiful, it is not as firm as the screw connection.