The practical and simple operation method of the riveting gun has been highly praised by the industrial industry. In recent years, it has also played a considerable role in the riveting industry. However, no matter how easy-to-use the machine is, it will not be maintained if it is not maintained regularly or if care is not paid during use. Failures will occur. Below, the editor will list the failures and solutions that often occur when using rivet guns, so as to bring a better experience of convenience and durability to your tool.

What does a rivet gun mainly consist of?

Answer: It mainly consists of handle, gun body, trigger, pipe joint, etc.

Various problems will occur during the use of the rivet gun. How to solve the problems when they are encountered? The following are the types and solutions of common problems.

question:

1. The rivet gun cannot pull the nail continuously or it can be pulled many times before it breaks;

Answer: The stroke of the oil cylinder has become shorter due to lack of oil; the claw pieces and push rods are worn; the claw sleeve is adjusted too far forward and the claw pieces cannot close together.

Solution: Add hydraulic oil to the cylinder; replace the claw piece and push rod; adjust the claw sleeve to the appropriate position.

2. The rivet gun will not pull out the nail after it is broken (the nail is stuck);

Answer: The guide nozzle does not match; the claw sleeve is adjusted too far back and cannot be opened.

Solution: Replace the matching guide nozzle; adjust the claw sleeve to the appropriate position and use a broken nail to insert the nail from the guide nozzle and it will naturally fall out from the back.

3. When the rivet gun presses the switch, there is no action of pulling the rivet and it only exhausts air.

Answer: The switch O-ring is broken; the piston O-ring is broken.

Solution: Replace the O-ring.