In order to reduce the looseness of equipment during work, we need to use ring groove rivets in some equipment. So since we all know that this product is a good fastening product when used, then you know what to do during installation Is it possible to reduce homework mistakes by doing this?

First of all, when we install ring groove rivets, we must pay attention to the fact that the product must be perpendicular to the workpiece we need to tighten, and the tools used cannot shake during installation, otherwise errors may occur during installation.

Second, of course, when installing, pay attention to the smoothness of the insertion, and when riveting, pay attention to the firmness of the gun.

Third, when we use tools, we must pay attention to the pressure regulating valve of the equipment being in the calibrated position.

Fourth, when riveting ring groove rivets, pay attention to the appropriate riveting bricks, otherwise problems may easily occur during use.

Fifth, when we are riveting, the length of the ring groove rivet must also be selected appropriately, otherwise there will be problems with the installation.

When using ring groove rivets, we must pay attention to several things:

(1) When riveting, the gun head should be perpendicular to the surface of the workpiece, and sufficient pressure should be applied to make the nail sleeve close to the workpiece;

(2) When riveting ring-groove rivets, the power of the power part and the lance head must meet the specifications and shape requirements of the rivets;

(3) The action of inserting or driving the rivet into the hole must be light and steady;

(4) When starting riveting, push the head of the draw gun to the bottom and hold the draw gun tightly;

(5) If the rivet head is not close to the component after riveting, it is absolutely not allowed to drive the rivet head;

(6) When riveting steel ring groove nails, the pressure regulating valve of the pulling gun must be adjusted to the high pressure position;

(7) When riveting upsetting rivet ring groove nails, pay attention to selecting appropriate riveting bricks, otherwise the nail sleeve will not buckle well;

(8) Pay attention to prevent the workpiece from being bumped or scratched due to the rebound of the gun when the nail rod is broken;

(9) After making the holes, the interlayer thickness of the riveted parts must be measured with an interlayer thickness gauge to select the appropriate rivet length.